시험패스에유효한C-ABAPD-2309덤프샘플문제다운덤프문제보기

Tags: C-ABAPD-2309덤프샘플문제 다운, C-ABAPD-2309시험대비 공부하기, C-ABAPD-2309시험유형, C-ABAPD-2309시험내용, C-ABAPD-2309최신 업데이트 시험공부자료

Fast2test 의 IT전문가들이 자신만의 경험과 끊임없는 노력으로 최고의 SAP C-ABAPD-2309학습자료를 작성해 여러분들이SAP C-ABAPD-2309시험에서 패스하도록 최선을 다하고 있습니다. 덤프는 최신 시험문제를 커버하고 있어 시험패스율이 높습니다. SAP C-ABAPD-2309시험을 보기로 결심한 분은 가장 안전하고 가장 최신인 적중율 100%에 달하는SAP C-ABAPD-2309시험대비덤프를 Fast2test에서 받을 수 있습니다.

Fast2test 에서는 최선을 다해 여러분이SAP C-ABAPD-2309인증시험을 패스하도록 도울 것이며 여러분은 Fast2test에서SAP C-ABAPD-2309덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. Fast2test 선택함으로SAP C-ABAPD-2309인증시험통과는 물론Fast2test 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 Fast2test의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.

>> C-ABAPD-2309덤프샘플문제 다운 <<

C-ABAPD-2309시험대비 공부하기 & C-ABAPD-2309시험유형

Fast2test는Fast2test의SAP인증 C-ABAPD-2309덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. Fast2test의SAP인증 C-ABAPD-2309덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.

최신 SAP Certified Associate C-ABAPD-2309 무료샘플문제 (Q17-Q22):

질문 # 17
Exhibit:

With Icl_super being superclass for Icl_subl and Icl_sub2 and with methods subl_methl and sub2_methl being subclass-specific methods of Id_subl or Icl_sub2, respectivel. What will happen when executing these casts?
Note:
There are 2 correct answers to this question

A. go_subl->subl_meth !(...)* w'll work.
B. go_sub2 = CAST # go super), will work. go_subl CAST #go_super), will work
C. go subl = CAST # go super), will not work
D. go_sub2 = CAST #(go_super). will not work. ] go sub2->sub2 meth 1(...). will work

정답：A,C

설명：
Explanation
The following are the explanations for each statement:
A: This statement is correct. go_subl = CAST #(go_super) will not work. This is because go_subl is a data object of type REF TO cl_subl, which is a reference to the subclass cl_subl. go_super is a data object of type REF TO cl_super, which is a reference to the superclass cl_super. The CAST operator is used to perform a downcast or an upcast of a reference variable to another reference variable of a compatible type. A downcast is a conversion from a more general type to a more specific type, while an upcast is a conversion from a more specific type to a more general type. In this case, the CAST operator is trying to perform a downcast from go_super to go_subl, but this is not possible, as go_super is not pointing to an instance of cl_subl, but to an instance of cl_super. Therefore, the CAST operator will raise an exception CX_SY_MOVE_CAST_ERROR at runtime12 B: This statement is incorrect. go_sub2 = CAST #(go_super) will work. go_subl = CAST #(go_super) will not work. This is because go_sub2 is a data object of type REF TO cl_sub2, which is a reference to the subclass cl_sub2. go_super is a data object of type REF TO cl_super, which is a reference to the superclass cl_super. The CAST operator is used to perform a downcast or an upcast of a reference variable to another reference variable of a compatible type. A downcast is a conversion from a more general type to a more specific type, while an upcast is a conversion from a more specific type to a more general type. In this case, the CAST operator is trying to perform a downcast from go_super to go_sub2, and this is possible, as go_super is pointing to an instance of cl_sub2, which is a subclass of cl_super.
Therefore, the CAST operator will assign the reference of go_super to go_sub2 without raising an exception. However, the CAST operator will not work for go_subl, as explained in statement A12 C: This statement is incorrect. go_sub2 = CAST #(go_super) will work. go_sub2->sub2_meth1(...) will not work. This is because go_sub2 is a data object of type REF TO cl_sub2, which is a reference to the subclass cl_sub2. go_super is a data object of type REF TO cl_super, which is a reference to the superclass cl_super. The CAST operator is used to perform a downcast or an upcast of a reference variable to another reference variable of a compatible type. A downcast is a conversion from a more general type to a more specific type, while an upcast is a conversion from a more specific type to a more general type. In this case, the CAST operator is trying to perform a downcast from go_super to go_sub2, and this is possible, as go_super is pointing to an instance of cl_sub2, which is a subclass of cl_super.
Therefore, the CAST operator will assign the reference of go_super to go_sub2 without raising an exception. However, the method call go_sub2->sub2_meth1(...) will not work, as sub2_meth1 is a subclass-specific method of cl_sub2, which is not inherited by cl_super. Therefore, the method call will raise an exception CX_SY_DYN_CALL_ILLEGAL_METHOD at runtime123 D: This statement is correct. go_subl->subl_meth1(...) will work. This is because go_subl is a data object of type REF TO cl_subl, which is a reference to the subclass cl_subl. subl_meth1 is a subclass-specific method of cl_subl, which is not inherited by cl_super. Therefore, the method call go_subl->subl_meth1(...) will work, as go_subl is pointing to an instance of cl_subl, which has the method subl_meth1123 References: NEW - ABAP Keyword Documentation, CAST - ABAP Keyword Documentation, Method Call - ABAP Keyword Documentation

질문 # 18
/DMO/I_Connection is a CDS view.
What variable type is connection full based on the following code? DATA connection full TYPE
/DMD/I_Connection.

A. Structure
B. Internal Table
C. Simple variable

정답：A

설명：
Explanation
Based on the following code, the variable type of connection_full is a structure. A structure is a complex data type that consists of a group of related data objects, called components, that have their own data types and names. A structure can be defined using the TYPES statement or based on an existing structure type, such as a CDS view entity or a CDS DDIC-based view. In this case, the variable connection_full is declared using the TYPE addition, which means that it has the same structure type as the CDS view entity /DMO/I_Connection.
The CDS view entity /DMO/I_Connection is a data model view that defines a data model based on the database table /DMO/Connection. The CDS view entity /DMO/I_Connection has the following components:
carrid, connid, airpfrom, airpto, distance, and fltime. Therefore, the variable connection_full has the same components as the CDS view entity /DMO/I_Connection, and each component has the same data type and length as the corresponding field in the database table /DMO/Connection.
References: CDS Data Model Views - ABAP Keyword Documentation, DATA - ABAP Keyword Documentation, Structure Types - ABAP Keyword Documentation

질문 # 19
Which of the following ABAP SQL statements are valid? Note: There are 2 correct answers to this question.

A. SELECT FROM /dmo/connection FIELDS V D MAX(distance) AS dist_max
MIN(distance) AS dist_min INTO TABLE @DATA(It_hits).
B. SELECT FROM /dmo/connection FIELDS carrid O airpfrom,
MAX(distance) AS dist_max, MIN( distance) AS dist_min GROUP BY carrid, airpfrom INTO TABLE
@DATA(It_hits)
C. SELECT FROM /dmo/connection FIELDS r-i carrid, airpfrom u GROUP BY carrid, connid INTO TABLE @DATA(It_hits).
D. SELECT FROM /dmo/connection FIELDS / O carrid, airpfrom,
MAX( distance) AS dist_max, MIN(distance) AS dist_min INTO TABLE @DATA(It_hits)

정답：B,D

설명：
The following are the explanations for each ABAP SQL statement:
* A: This statement is valid. It selects the fields carrid, airpfrom, and the aggregate functions MAX(distance) and MIN(distance) from the table /dmo/connection, and groups the results by carrid and airpfrom. The aggregate functions are aliased as dist_max and dist_min. The results are stored in an internal table named It_hits, which is created using the inline declaration operator @DATA.
* B: This statement is valid. It is similar to statement A, except that it does not specify the GROUP BY clause. This means that the aggregate functions are applied to the entire table, and the results are stored in an internal table named It_hits, which is created using the inline declaration operator @DATA.
* C: This statement is invalid. It selects the aggregate functions MAX(distance) and MIN(distance) from the table /dmo/connection, but it does not specify any grouping or non-aggregate fields. This is not allowed in ABAP SQL, as the SELECT list must contain at least one non-aggregate field or a GROUP BY clause. The statement will cause a syntax error.
* D: This statement is invalid. It selects the fields carrid and airpfrom from the table /dmo/connection, and groups the results by carrid and connid. However, the field connid is not included in the SELECT list, which is not allowed in ABAP SQL, as the GROUP BY clause must contain only fields that are also in the SELECT list. The statement will cause a syntax error.
References: SELECT - ABAP Keyword Documentation, GROUP BY - ABAP Keyword Documentation

질문 # 20
After you created a database table in the RESTful Application Programming model, what do you create next?

A. A data model view
B. A projection view
C. A metadata extension
D. A service definition

정답：B

설명：
After you created a database table in the RESTful Application Programming model (RAP), the next step is to create a projection view on the database table. A projection view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A projection view can select, rename, or aggregate the fields of the data sources, but it cannot change the properties of the fields, such as whether they are read-only or not. The properties of the fields are inherited from the data sources or the behaviour definitions of the business objects12. For example:
* The following code snippet defines a projection view ZI_AGENCY on the database table
/DMO/AGENCY:
define view ZI_AGENCY as select from /dmo/agency { key agency_id, agency_name, street, city, region, postal_code, country, phone_number, url } The projection view is used to expose the data of the database table to the service definition, which is the next step in the RAP. The service definition is a CDS artefact that defines the interface and the binding of a service.
A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable12. For example:
* The following code snippet defines a service definition ZI_AGENCY_SRV that exposes the projection view ZI_AGENCY as an OData service:
define service ZI_AGENCY_SRV { expose ZI_AGENCY as Agency; }
You cannot do any of the following:
* A. A metadata extension: A metadata extension is a CDS artefact that defines additional annotations for a CDS entity, such as a business object, a service, or a projection view. A metadata extension can specify the properties of the fields of a CDS entity for UI or analytical purposes, such as whether they are visible, editable, or hidden. However, a metadata extension is not the next step after creating a database table in the RAP, as it is not required to expose the data of the database table to the service definition. A metadata extension can be created later to customize the UI or analytical application that uses the service12.
* C. A data model view: A data model view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A data model view can select, rename, or aggregate the fields of the data sources, and it can also change the properties of the fields, such as whether they are read-only or not. The properties of the fields are defined by the annotations or the behaviour definitions of the data model view. A data model view is used to define the data model of a business object, which is a CDS entity that represents a business entity or concept, such as a customer, an order, or a product.
However, a data model view is not the next step after creating a database table in the RAP, as it is not required to expose the data of the database table to the service definition. A data model view can be created later to define a business object that uses the database table as a data source12.
* D. A service definition: A service definition is a CDS artefact that defines the interface and the binding of a service. A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable. However, a service definition is not the next step after creating a database table in the RAP, as it requires a projection view
* or a data model view to expose the data of the database table. A service definition can be created after creating a projection view or a data model view on the database table12.
References: 1: ABAP CDS - Data Definitions - ABAP Keyword Documentation - SAP Online Help 2: ABAP CDS - Service Definitions - ABAP Keyword Documentation - SAP Online Help

질문 # 21
Which field is defined incorrectly?

A. field1
B. field2
C. field4
D. field3

정답：C

설명：
The field4 is defined incorrectly in the ABAP code snippet. The reason is that the data type c (character) cannot have a decimal places specification. The decimal places specification is only valid for the data types p (packed number) and f (floating point number)1. Therefore, the field4 definition should either omit the decimal places specification or change the data type to p or f.
References: 1: Data Types and Data Objects - ABAP Keyword Documentation - SAP Online Help

질문 # 22
......

우리는 고객이 첫 번째 시도에서SAP C-ABAPD-2309 자격증시험을 합격할수있다는 것을 약속드립니다. SAP C-ABAPD-2309 시험을 합격하여 자격증을 손에 넣는다면 취직 혹은 연봉인상 혹은 승진이나 이직에 확실한 가산점이 될것입니다. SAP C-ABAPD-2309시험 어려운 시험이지만 저희SAP C-ABAPD-2309덤프로 조금이나마 쉽게 따봅시다.

C-ABAPD-2309시험대비 공부하기: https://kr.fast2test.com/C-ABAPD-2309-premium-file.html

많은 시간과 정신력을 투자하고 모험으로SAP인증C-ABAPD-2309시험에 도전하시겠습니까, Fast2test의 SAP C-ABAPD-2309덤프로 자격증 취득의 꿈을 이루어보세요, 덤프의 무료샘플을 원하신다면 우의 PDF Version Demo 버튼을 클릭하고 메일주소를 입력하시면 바로 다운받아 C-ABAPD-2309덤프의 일부분 문제를 체험해 보실수 있습니다, Fast2test C-ABAPD-2309시험대비 공부하기는 많은 IT인사들의 요구를 만족시켜드릴 수 있는 사이트입니다, 체험 후Fast2test 에서 출시한SAP C-ABAPD-2309덤프에 신뢰감을 느끼게 될것입니다, SAP인증 C-ABAPD-2309덤프구매로 시험패스가 쉬워지고 자격증 취득율이 제고되어 공을 많이 들이지 않고서도 성공을 달콤한 열매를 맛볼수 있습니다.

사람의 진면목은 위기에 처했을 때 드러나는 법이 아니겠습니까, 사귀기는 뭐 사겨, 많은 시간과 정신력을 투자하고 모험으로SAP인증C-ABAPD-2309시험에 도전하시겠습니까, Fast2test의 SAP C-ABAPD-2309덤프로 자격증 취득의 꿈을 이루어보세요.

완벽한 C-ABAPD-2309덤프샘플문제 다운 인증자료

덤프의 무료샘플을 원하신다면 우의 PDF Version Demo 버튼을 클릭하고 메일주소를 입력하시면 바로 다운받아 C-ABAPD-2309덤프의 일부분 문제를 체험해 보실수 있습니다, Fast2test는 많은 IT인사들의 요구를 만족시켜드릴 수 있는 사이트입니다.

체험 후Fast2test 에서 출시한SAP C-ABAPD-2309덤프에 신뢰감을 느끼게 될것입니다.